beautypg.com

Flight log – Garmin GPSMAP 396 User Manual

Page 53

background image

GPSMAP 396 Owner’s Manual

5

A

vIAtIon

M

ode

P

Ages

>

f

lIght

l

og

Flight Log

The Flights tab shows a list of any recorded flights, including date,

route of flight, and flight time. The GPSMAP 396 saves up to 50

recorded flights while in Aviation Mode. Entries on this list are

automatically created for each flight.
The bottom of the Flights tab shows the time of your last flight. This

resets if you select all Unit Defaults from the System tab options

menu.
An optional FlightBook software package is available to further

simplify your flight record keeping. For details about FlightBook,

visit the Garmin Web site at

www.garmin.com/aviation

.

Viewing the Flight Log

Recording begins when your speed exceeds 30 knots and you

gain 250 feet of altitude. The route of Flight field uses the

nearest airport as the departure airport. The destination airport is

continuously updated as your flight progresses.
If you land and groundspeed drops below 30 knots, the flight entry

is saved and a new entry is recorded when you depart the airport.

A touch-and-go or brief stop of less than 10 minutes appends to the

current flight record, rather than starting a new entry.
Select any listed entry in the log to view additional information.

To view details for a flight:

1. Press

MENU twice to open the Main Menu.

2. Highlight

Flights from the vertical menu of tabs.

3. Press

MENU and select Show Hours and Minutes to view

the flights in minutes and hours, if you prefer.

4. Highlight the flight, and press

ENTER. The flight details

window opens, shown below.

5. With

OK highlighted, press ENTER to return to the Flights tab.

Flight Tab

Showing the flight details page

Deleting Flight Records

You can delete the highlighted flight record (Delete Flight) or delete

all flight records from the Flight Log (Delete all). To delete flights,

press MEnU (with the Flights tab information shown). Use the

roCKEr to highlight a menu option, and press EntEr.