Garmin GPSMAP 192C User Manual
Page 63
GPSMAP 192C Owner’s Manual
57
M
AIN
M
ENU
>
R
OUTES
T
AB
Add Before—inserts a waypoint into the list of route points or add
a point(s) onto the end of the route.
To insert a point into the route, or add a point to
the end:
1. From either the Route Review or Active Route pages, use
the
ROCKER to highlight the point you want to insert the
new point before (to add a point to the end, highlight the
blank field at the bottom of the list), and press
MENU.
2. Highlight
Add Before, and press ENTER.
3. From the
Find menu, highlight Waypoints, and press
ENTER. (You can also choose from other points, such as
Cities or Tide Stations from this list.) From either the
User
or
Nearest From Current Location tab lists, choose the
waypoint you want and press
ENTER twice. (See page
for searching for waypoints by name.)
Or
To select a waypoint from the map, highlight the
User or
Nearest tab and press MENU. With Select From Map
highlighted, press
ENTER. Use the zoom IN and OUT
buttons and the
ROCKER to highlight a waypoint on the
map, and press
ENTER.
Drag the route
leg to an existing
waypoint (shown),
map item, or a
blank spot on the
map to create a
new route point.
Remove—removes a point (waypoint or map item) from a route.
This option is available from both the Route Review and Active
Route pages.
To remove a point from a route:
1. From either the Route Review or Active Route pages, use
the
ROCKER to highlight the point to remove, and press
MENU.
2. Highlight
Remove, and press ENTER.