Compass mode, Main display – SUUNTO X10 User Manual

Page 32

3.4. COMPASS MODE
The compass mode aids the GPS functions and offers you
navigational support even when the GPS is off. In the
Compass menu you can set the declination and calibrate the
compass to ensure accurate readings in any location.

3.4.1. Main display
When you select the Compass mode, the main display opens.
The main display has three rows and the circular North
indicator:
Cardinal points:
The first row displays the cardinal and half-cardinal point
abbreviations.
Heading:
The second row displays the heading in degrees.
Shortcuts:
The third row displays alternatively the time, the bearing lock
or the bearing (bea). Change the displayed information with
STOP/BACK.
Time: Displays the current time.
Bearing lock: This feature helps you follow a certain bearing.
Rotate your Suunto X10 horizontally until the desired bearing
is displayed on the second row and press START/DATA.
Press START/DATA again to select a new bearing. The
bottom row displays the degree deviation, to the left or right,
from the target bearing.

This manual is related to the following products:

Wristop Computer X10