SUUNTO X10 User Manual

Page 18

Sync
When the Sync setting is on, Suunto X10 sychronizes the current time from the
satellite signal every time the GPS is activated. You will also have to set the correct
UTC Offset for your time zone.
If Sync is off, the manually set time is not automatically updated.
To set the time synchronization:
1. In the Set menu, scroll to Time/Date and press ENTER.
2. Scroll to Sync and press ENTER. The On/Off field is

activated.

3. Change the On/Off status with UP/DOWN and long press

ENTER. The time synchronization is now set. You return to
the Time mode’s main display.

UTC offset
You can set the UTC offset at 0,5 hour intervals depending on the time zone. For time
zones other than Greenwich time (GMT) + full or half-hours, you have to set the time
manually and keep Sync off.
To set the UTC offset:
1. In the Set menu, scroll to Time/Date and press ENTER.
2. Select UTC with UP/DOWN and press ENTER. The offset

field is activated and it shows either plus or minus hours
from the GMT.

3. Adjust the offset with UP/DOWN and press ENTER. The

UTC offset is now set.

4. Press STOP/BACK to return to the Set menu.

This manual is related to the following products:

Wristop Computer X10