ACU-RITE SENC 50 - Manual (Page 9)

A variety of mounting conditions can be accommodated.
• Mechanical configuration of the equipment determines
brackets and adapters required to install the linear encoder.
• Three typical conditions are shown for reference.
• Flush or offset mounting surfaces using a spar.
• Reading head mounting bracket required (bottom mounting
bracket example shown).
SENC 50 Typical mounting
• Mounting surfaces are flush within .005”.
• Installation without a backup spar.
7
Acu-Rite Companies Inc.
Spar mounting
Flush mounting surfaces
Offset mounting surfaces
• Offset mounting surfaces using a reading head bracket.
// .005
// .030
// .030