ACU-RITE VRO 300 Addendum - Manual (Page 8)

VRO 300
ADDENDUM
2002-7001 Ed A Page 8 of 9
ACU-RITE
Saving a Program using Remote Storage
Begin by pressing the PROGRAM FUNCTIONS softkey, then press the SAVE
softkey to save programs using the Remote Storage feature. A form will appear
which will enable you to enter a name for the part program. The program will be
saved to the internal storage of the VRO 300.
If the REMOTE STORAGE softkey is pressed, the program will be uploaded to
the host computer. If the softkey is released, the program will be saved in the
VRO 300.
Note: The REMOTE STORAGE softkey is only available if the serial port is
configured for remote storage.
The Program Name field defaults to the name shown in the program listing. A
program name is comprised of numbers or letters (press the alphabet softkey) and
is limited to 8 digits/characters.
Pressing the SAVE softkey (or ENTER key) saves the program on the host com-
puter. If a program with that name already exists, the operator will be asked if it is
OK to overwrite what already exists.
While the program is being uploaded to the host computer, the operator may can-
cel the save procedure by pressing the CANCEL softkey.
If the upload is canceled, the system will return to the PGM view and the message
“SAVE PROGRAM CANCELED.” will be displayed on the prompt bar.
If the upload fails, the system will return to the PGM view and a message explain-
ing the error will be displayed on the prompt bar.
If the upload is successful, the system will return to the PGM view.
REMOTE
STORAGE
ALPHABET CANCEL SAVE
ENTER A NAME FOR THE PROGRAM. SAVE PROGRAM
PROGRAM NAME
387920-2
CANCEL
SAVING PROGRAM. PLEASE WAIT OR PRESS CANCEL SOFT KEY.