ACU-RITE DRO 200M - Manual (Page 23)

Readout Operations DRO 200M
16
8
6 5 4
2
Tool Right
Edge
Tool Center
Tool Front
Edge
Tool Left
Edge
Tool Back
Edge
Tool Offset
If you enter the diameter of the cutting tool you are using, you don’t have to add
or subtract the tool’s radius when you enter a preset. Just select which edge of the
tool you want to compensate for, and the
DRO 200M
automatically adds or
subtracts the tool’s radius.
Defining the Offset Direction
The symbols on the number keys indicate the offset directions—they represent a
top view of the tool and the part edge.
Whenever the readout is displaying an absolute or incremental position, the
number keys can be used for tool offset compensation. Just press the key
corresponding to the edge of the tool whose position you want to display.
4
6
8
2
Inside...
4 6
8
2
...and outside