Acura 2012 MDX - Manual (Page 155)

Recalling a Memorized Driving
Position
When you unlock the driver's door
with your remote, each remote
activates the keyless memory
settings related to that remote. The
driver's ID (DRIVER 1 or DRIVER 2)
is shown on the back of each remote.
Here are the settings activated with
the remote:
● Customized settings
(see page 90).
● Driving position memory
(see page 168).
●
Audio system settings
(see page 212).
●
Climate control settings
(see page 183).
When you unlock and open the
driver's door with the remote
transmitter, the driver's seat (except
the power lumbar feature) and
outside mirrors start to move to the
positions stored in memory. The
indicator in the related memory
button to the remote comes on.
The steering wheel will move to the
stored position when you insert the
key into the ignition switch.
You will also see the ‘‘WELCOME
DRIVER 1 ’’ or ‘‘WELCOME DRIVER
2 ’’ message on the multi-information
display, depending on which linked
remote transmitter is used.
Remote Transmitter
148
11/08/29 10:08:20 12 ACURA MDX MMC North America Owner's M 50 31STX650 enu