Acura 2012 ZDX - Manual (Page 79)

77
uu Indicators u
Continued
In
st
ru
men
t P
a
ne
l
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition switch.
Indicator Name On/Blinking Explanation Message
CRUISE MAIN
Indicator
*
● Comes on when you press the
CRUISE button.
2 Cruise Control* P. 232 —
CRUISE CONTROL
Indicator
*
● Comes on if you have set a speed for
cruise control.
2 Cruise Control* P. 232 —
Keyless Access
System Indicator
*
● Comes on for a few seconds when
you change the power mode to ON.
● Comes on as soon as a problem is
detected in the keyless access
system or keyless starting system.
● Have your vehicle checked by a dealer.
SH-AWD® (Super
Handling-All
Wheel Drive
TM )
Indicator
● Comes on for a few seconds when
you turn the ignition switch to ON
( w *1 , then goes off.
● Comes on if there is a problem with
the SH-AWD® system.
● Blinks when the differential
temperature is too high.
● Stays on constantly –the engine
drives the front wheels only in this state.
Have the vehicle checked by a dealer.
● Blinks while driving – Stop in a safe
place, shift to P, and idle the engine
until the indicator goes off. If the
indicator does not stop blinking, take
your vehicle to a dealer.
2 SH-AWD® (Super Handling-All
Wheel Drive TM ) P. 245
* Not available on all models