Acura 2012 ZDX - Manual (Page 141)

139
uu Operating the Switches Around the Steering Wheel u Driving Position Memory System
Co
ntr
ols
1. Adjust the driver’s seat, the steering wheel and
the outside mirrors to the desired position, and
turn the ignition switch to ON w
*1 .
2. Press the SET button.
u You will hear the beeper, and the memory
button indicator light will blink.
3. Press memory button 1 or 2 within five
seconds of pressing the SET button.
u Once the seat, the steering wheel and
the outside mirror positions have been
memorized, the indicator light on the
button you pressed stays on.
1. Move the shift lever to P.
2. Apply the parking brake.
3. Press a memory button ( 1 or 2).
u You will hear the beeper, and the
indicator light will blink.
The seat, the steering wheel and the outside
mirrors will automatically move to the memorized
positions. When it has finished moving, you will
hear the beeper, and the indicator light stays on.
*1: Models with the keyless access system have an ENGINE START/STOP button
instead of an ignition switch.
■ Storing a Position in Memory 1 Storing a Position in Memory
After you press the SET button, the storing operation
will be canceled when:
• You do not press the memory button within five
seconds.
• You readjust the seat, the steering wheel or the
outside mirror position before the double-beep.
• You turn the ignition switch to any position except
ON
( w *1 .
Set Button
Memory Button 1
Memory Button 2
■ Recalling the Stored Position 1 Recalling the Stored Position
The seat will stop moving if you:
• Press the SET button, or a memory button ( ( 1 or
( 2).
• Adjust the seat, the steering wheel or the outside
mirror position.
• Shift into any position except ( P.
Memory Buttons