Acura 2012 ZDX - Manual (Page 133)

131
uu Operating the Switches Around the Steering Wheel u Turn Signals
Continued
Co
ntr
ols
Turn Signals
The turn signals can be used when the ignition
switch is in ON w
*1 .
Light Switches
Rotating the light switch turns the lights on
and off, regardless of the position of the
ignition switch.
■ High beams
Push the lever forward until you hear a click.
■ Low beams
When in high beams, pull the lever back to
return to low beams.
■ Flashing the high beams
Pull the lever back, and release it.
*1: Models with the keyless access system have an ENGINE START/STOP button
instead of an ignition switch.
Right Turn
Left Turn
■ Manual Operation 1 Light Switches
If you remove the key *1 from the ignition switch while
the lights are on, a chime sounds when the driver’s
door is opened.
When the lights are on, the lights on indicator in the
instrument panel will be on.
2 Lights On Indicator P. 75
Repeatedly turning the headlights on and off reduces
the life of the HID headlight bulbs.
If you sense that the level of the headlights is
abnormal, have the vehicle inspected by a dealer.
Do not leave the lights on when the engine is off
because it will cause the battery to discharge.
High Beams
Flashing the high beams
Low Beams
Turns on parking, side marker,
tail, and rear license plate lights
Turns on headlights, parking,
side marker, tail, and rear
license plate lights