Fog light bulbs – Acura 2012 TSX User Manual
Page 253

Continued
251
uu
Replacing Light Bulbs
u
Fog Light Bulbs
Main
tenan
ce
4. Unhook the hook, and pull out the
connector.
5. Remove the old bulb and insert the new
bulb.
6. Put the connector back into the headlight
assembly.
Fog Light Bulbs
When replacing, use the following bulbs.
1. Remove the clip using a flat-tip screwdriver,
and lower the under cover.
1
Insert the clip with the central pin raised, and push
until it is flat.
Push until the
pin is flat
Hook
Bulb
Connector
Fog Light: 55 W
1
NOTICE
Halogen bulbs get very hot when lit. Oil, perspiration,
or a scratch on the glass can cause the bulb to
overheat and shatter.
The fog lights are halogen bulbs.
When replacing a bulb, handle it by its plastic case,
and protect the glass from contact with your skin or
hard objects. If you touch the glass, clean it with
denatured alcohol and a clean cloth.
Clip
Under Cover
TSX 4D-31TL1630.book 251 ページ 2011年6月29日 水曜日 午後4時46分