P140, Auxiliary input jack audio system theft protection, Auxiliary input jack – Acura 2012 TSX User Manual
Page 142: Audio system theft protection

140
uu
Audio System
u
Auxiliary Input Jack
Features
Auxiliary Input Jack
Use the jack in the console compartment to connect standard audio devices.
1. Open the AUX cover.
2. Connect a standard audio device to the 
input jack using a 1/8 inch (3.5 mm) stereo 
miniplug.
u
The audio system automatically switches 
to the AUX mode.
Audio System Theft Protection
The audio system is disabled when it is disconnected from the power source, such as 
when the battery is disconnected or goes dead.
■
Entering the audio security code
ENTER CODE appears on the display when the power is reconnected.
1. Turn on the audio system.
2. Enter the audio security code using the preset buttons. If you enter an incorrect 
digit, continue to the last digit, then try again. If you do not enter the code 
correctly after 10 tries, you need to visit a dealer to have the system reset.
1
To switch the mode, press any of the audio mode 
buttons. You can return to the AUX mode by 
pressing the AUX button.
You cannot use the auxiliary input jack if you replace 
the audio system.
State or local laws may limit the circumstances in 
which you can launch or control your attached audio 
device.
1
Find the audio system’s security code and serial 
number on the radio code card.
Do not store the card in your vehicle. If you lose the 
radio code card, you must obtain the information 
from a dealer.
TSX 4D-31TL1630.book 140 ページ 2011年6月29日 水曜日 午後4時46分
