Replacing light bulbs p. 247, P247), Replacing light bulbs – Acura 2012 TSX User Manual
Page 249: Headlight bulbs

247
Continued
Main
tenan
ce
Replacing Light Bulbs
Headlight Bulbs
When replacing, use the following bulbs.
1. Remove all the engine compartment covers.
2 Engine Compartment Covers P. 233
2. Remove the engine coolant reservoir.
High beam headlight: 60 W (HB3)
Low beam headlight:
55 W (H1 for halogen bulb Type)
35 W (D2S for high voltage discharge type)
■
High Beam Headlight
1
NOTICE
Halogen bulbs get very hot when lit.
Oil, perspiration, or a scratch on the glass can cause 
the bulb to overheat and shatter.
The headlight aim is set by the factory, and does not 
need to be adjusted. However, if you regularly carry 
heavy items in the trunk or tow a trailer, have the 
aiming readjusted at a dealer or by a qualified 
technician.
The HB3 and H1 types are halogen bulbs.
When replacing a bulb, handle it by its base, and 
protect the glass from contact with your skin or hard 
objects. If you touch the glass, clean it with 
denatured alcohol and a clean cloth.
Engine Coolant Reservoir
4-cylinder models
6-cylinder models
Passenger side
All models
6-cylinder models
Engine Coolant Reservoir
TSX 4D-31TL1630.book 247 ページ 2011年6月29日 水曜日 午後4時46分
