Acura 2012 RDX - Manual (Page 476)

Checking and Replacing Fuses
If something electrical in your
vehicle stops working, the first thing
you should check for is a blown fuse.
Determine from the chart on pages
473 and 474, or the diagram on the
fuse box lid, which fuse or fuses
control that device. Check those
fuses first, but check all the fuses
before deciding that a blown fuse is
the cause. Replace any blown fuses,
and check if the device works.
1. Turn the ignition switch to the
LOCK (0) position. Make sure the
headlights and all other
accessories are off.
2. (Under-hood fuse boxes)
Remove the cover from the fuse
box.
3. Check each of the large fuses in
the under-hood fuse box by
looking through the side window
at the wire inside. Remove the
screws with a Phillips-head
screwdriver.
FUSE
BLOWN BLOWN
Fuses
470
11/06/16 17:42:51 12 ACURA RDX MMC North America Owner's M 50 31STK650 enu