Acura 2014 RLX - Manual (Page 148)

147
uu Operating the Switches Around the Steering Wheel u Driving Position Memory System
1. Set the power mode to ON. Adjust the
driver’s seat, the steering wheel and the
door mirrors to the desired position.
2. Press the SET button.
u You will hear the beep, and the memory
button indicator light will blink.
3. Press memory button ( 1 or ( 2 within five
seconds of pressing the SET button.
u Once the seat, the steering wheel and
the outside mirror positions have been
memorized, the indicator light on the
button you pressed stays on.
1. Move the shift lever to ( P .
2. Apply the parking brake.
3. Press a memory button ( ( 1 or ( 2 ).
u You will hear the beep, and the indicator
light will blink.
The seat, the steering wheel and the door
mirrors will automatically move to the
memorized positions. When it has finished
moving, you will hear the beep, and the
indicator light stays on.
■ Storing a Position in Memory 1 Storing a Position in Memory
After you press the SET button, the storing operation
will be canceled when:
• You do not press the memory button within five
seconds.
• You readjust the seat, the steering wheel or the
outside mirror position before the double-beep.
• You set the power mode to any position except
ON.
SET Button
Memory Button 1
Memory Button 2
■ Recalling the Stored Position 1 Recalling the Stored Position
The seat will stop moving if you:
• Press the SET button, or a memory button ( ( 1 or
( 2).
• Adjust the seat, the steering wheel or the door
mirror position.
• Shift into any position except ( P.
Memory Buttons
14 ACURA RLX-31TY26000.book 147 ページ ２０１３年３月１８日 月曜日 午後３時１８分
QRG
Index
2014 RLX
Co
ntrols
TOC