Acura 2014 RLX User Manual
Page 143
uu
Operating the Switches Around the Steering Wheel
u
Wipers and Washers
142
Co
ntrols
When you push the lever down to AUTO, the
windshield wipers sweep once, and go into
the automatic mode.
The wipers operate intermittently, at low
speed, or at high speed and stops in
accordance with the amount of rainfall the
rainfall sensor detects.
■
AUTO sensitivity adjustment
When in AUTO, you can also adjust the
rainfall sensor sensitivity using the
adjustment ring.
Sensor sensitivity
■
Automatic Intermittent Wipers
*
1
Wipers and Washers
If the wiper stops operating due to any obstacle such
as the build-up of snow, park the vehicle in a safe
place.
Rotate the wiper switch to OFF, and set the power
mode to ACCESSORY or VEHICLE OFF (LOCK), then
remove the obstacle.
1
Automatic Intermittent Wipers
*
The rainfall sensor is in the location shown below.
Do not put the wiper lever in AUTO when cleaning
the windshield or driving through a car wash. If the
wiper lever is in AUTO, and the power mode is in ON,
the rainfall sensor may respond to your hand or car
wash liquids, and the wipers may operate
automatically.
Rainfall Sensor
Adjustment Ring
Low: The wipers start to
react to a larger amount
of rainfall.
High: The wipers start to
react to a smaller amount
of rainfall.
* Not available on all models
14 ACURA RLX-31TY26000.book 142 ページ ２０１３年３月１８日 月曜日 午後３時１８分
QRG
Index
TOC
2014 RLX