Acura 2012 RL Navigation - Manual (Page 12)

Navigation System 11
ACURA_RL KA 31SJA850
Getting Started
SET UP button
Displays the
SETUP screen where you
can customize information in the
system. See page 92.
Display Mode button
Switches the display between Day
mode, Night mode, and OFF. See
page 114.
CANCEL button
Cancels the current screen and returns to
the previous screen display.
NOTE:
The NAVI BACK button performs the
same basic function.
Other buttons
See your Owner’s Manual.
Interface Dial/ENTER button
The Interface Dial moves left, right,
up, and down. Use the Interface Dial
to look around a displayed map. Moving
the Interface Dial up or down can also
be used to scroll up or down a page in a
list. You can also rotate the Interface
Dial knob to move the highlighting
around the display or to scroll through a
list. After making a selection in a menu
or list, push in on the Interface Dial
(ENTER button) to enter the selection
into the system.
In almost all cases, you can enter a
selection into the system by pushing in
on the Interface Dial.
When you are displaying a map, rotating
the Interface Dial knob allows you to
change the scale. Rotating it clockwise
reduces the scale, showing less area
with greater detail. Rotating it
counterclockwise increases the scale,
showing more area with less detail.
Selector
ENTER
Knob
00 ACURA_RL_KA.book 11 ページ ２０１１年８月２６日 金曜日 午後５時８分