beautypg.com

System setup – Acura 2012 RL Navigation User Manual

Page 113

background image

112 Navigation System

ACURA_RL KA 31SJA850

System Setup

Vehicle

From the

SETUP

screen (

Other

), say

or select Vehicle and the following
screen appears:

Off-road Tracking
With this ON, the system will provide
white off-road tracking dots
(“breadcrumbs”) on the

map

screen

whenever you drive into an area where
the map does not show any roads. See
Map Screen Legend on page 20.

After you have traveled approximately
1/2 mile away from a mapped road, the
system will display a series of white
dots on the

map

screen to show the path

you have traveled. This is provided so
you can follow the dots to backtrack to
the mapped road you originally left.
Tracking continues until you reach a
mapped road. See Off-road Tracking on
page 70.

Tracking is shown only in the 1/20, 1/8,
1/4, and 1/2 mile scales, or the 80, 200,
400, and 800 meter scales. Rotate the
Interface Dial knob to change the
scales if necessary.

NOTE:
To clear existing dots, turn this feature
off and exit SETUP. To re-enable this
feature, return to SETUP and turn it on
again.

Correct Vehicle Position
The system relies on satellites for
positioning information. Buildings,
tunnels, and other objects can block or
reflect these signals, requiring the
system to use “dead reckoning” to
determine your location and direction.
This can sometimes lead to small errors
in positioning, such as showing you on
an adjacent street.

NOTE:
Using this function to adjust vehicle
position is not recommended. When the
system acquires a GPS signal, it will
automatically place the vehicle in the
correct location.

If you choose to do this, follow these
steps:

1. Stop the vehicle.

00 ACURA_RL_KA.book 112 ページ 2011年8月26日 金曜日 午後5時8分

This manual is related to the following products: