AcuRite 00250 Weather Station - Manual (Page 5)

5
Intelli-Time
®
Clock
Intelli-Time products are pre-programmed with the correct time and date.
Intelli-Time technology instructs the time and date to set themselves. All you
need to do is select your Time Zone and Daylight Saving Time preferences. The
clock will then automatically set itself and change for Daylight Saving Time.
To select your time zone, press the “ZONE” button located on the back of the
display unit inside the battery compartment.
Set the Time & Date & Units
Press the “SET” button to enter SET MODE. Once in SET MODE, the
preference you are currently setting will blink on the display.
To adjust the currently selected (flashing) item, press and release the “+” or
“–” buttons (press and HOLD to fast adjust).
To save your adjustments, press and release the “SET” button again to adjust
the next preference. The preference set order is as follows:
TIME ZONE (PST MST CST EST AST HAST AKST)
DST* (Daylight Saving Time ON or OFF)
CLOCK HOUR
CLOCK MINUTE
CALENDAR MONTH
CALENDAR DATE
CALENDAR YEAR
You will automatically exit SET MODE if no buttons are pressed for 30 seconds.
Enter SET MODE at any time by pressing the “SET” button for 3 seconds.
*DST is set to ON by default. If you live in an area that observes daylight
saving time, DST should remain ON.
Set the Measurement Units
To select between degrees Fahrenheit (ºF) or Celsius (ºC) temperature units,
press the “ºC/ºF” button located on the back of the display unit inside the
battery compartment.