AcuRite 00739 Sensor - Manual

INSTRUCTION MANUAL
Remote Sensor Unit
Model 00739
Acu-Rite instruments have been designed to provide accurate and reliable
measurements. Please read the instructions thoroughly before setting up the sensor.
BATTERY INSTALLATION
Insert 2 AAA alkaline batteries into the sensor unit. Note: The battery panel is located
behind the foldable stand/mounting plate, which can be gently pried from the back of the
unit. A small screwdriver is required to open the battery panel.
After inserting the batteries, locate the reset or Tx button the sensor (usually under the
battery cover) and press the button to establish communications with the main unit.
LOW BATTERY INDICATOR
The low battery indicator is shown on the LCD panel of the sensor unit.
The sensor has an average battery life of 6 months, depending on usage. Note:
Alkaline batteries are recommended.
The sensor can transmit up to 100 feet distance without outside. Sources of
interference include, but are not limited to, metal surfaces, electrical devices, etc.
The sensor may need to be relocated if experiencing interference.
The sensor unit has a waterproof case. The 10 ft. detachable probe can be
submersed to measure the temperature in ponds, aquariums, etc.
Note: When remote temperatures reach -12°F/-24°C or lower, bring sensor units
indoors and use the detachable probe to monitor outdoor temperatures by placing
the probe out a window. Severe cold weather freeze the batteries and LCD panel,
causing malfunctions.
Temperature Range:
Remote sensor:
-58 F-158° F/-50° C-70° C
CHANEY INSTRUMENT CO.
LAKE GENEVA, WISCONSIN 53147
www.chaneyinstrument.com
LIMITED WARRANTY: Should this product from the Chaney Instrument Co. prove to be defective in material or
workmanship within one year of original purchase it will be repaired or replaced. This warranty does not cover
damage in shipment or failure caused by tampering, carelessness, or abuse
.