Display unit, Back of display unit – AcuRite 00638 Weather Station User Manual
Page 5
5
DISPLAY UNIT
1. Date
2. Low Battery Indicator
3. Atomic Clock
Maintains time with split-second
accuracy and automatically updates
for daylight saving time.
4. Atomic Clock Signal Strength
5. Selected Time Zone
6. Barometric Pressure
Arrow icon indicates the direction
the pressure is trending.
7. History Chart Icon
Indicates data is currently displayed on
the History Chart (22).
8. Moon Phase
9. History Chart Icon
Indicates data is currently displayed on
the History Chart (22).
10. Current Outdoor Temperature
Arrow icon indicates direction
temperature is trending.
11. Sensor Signal Strength
12. Low Sensor Battery Indicator
13. Current Indoor Humidity
14. High/Low Records Indicator
Indicates whether minimum or
maximum records are being shown.
15. Current Indoor Temperature
16. Removable Tabletop Stand
17. MIN/MAX Button
Press to view high or low records for
temperature and humidity.
18. SCALE Button
Changes data units to either
U.S. units or imperial units.
19. HISTORY MODE Button
Press to toggle between pressure,
temperature and wind speed data
on the History Chart (22).
20. + Button
For setup preferences.
21. SET Button
For setup preferences.
22. Multi-Variable History Chart
Displays the past 12 hours of data for
pressure, temperature or wind speed.
23. Seasonal
Displays heat index, dew point or
wind chill, depending on the current
outdoor temperature.
24. Average Wind Speed
Based on all wind speed readings
from the past 2 minutes.
25. Peak Wind Speed
Highest speed from past 60 minutes.
26. Current Wind Speed
27. History Chart Icon
Indicates data is currently displayed on
the History Chart (22).
28. Learning Mode Icon
Disappears after weather forecast
self-calibration is complete.
29. 12 to 24 Hour Weather Forecast
Self-Calibrating Forecasting pulls data
from the outdoor sensor to generate
your personal forecast.
BACK OF DISPLAY UNIT
30. Reset Button
Full reset to factory defaults.
31. Integrated Hang Hole
For easy wall mounting
32. A-B-C Switch
ID code that must match sensor’s A-B-C
switch to ensure units synchronize.
33. Battery Compartment Cover
34. Battery Compartment