Polarized plug instruction – Activeforever Invacare XPO2 Portable Oxygen Concentrator User Manual
Page 10

SECTION 1—GENERAL GUIDELINES
10
Part No 1148112
Other devices may experience interference from even the low
levels of electromagnetic emissions permitted by the above
standards. To determine if the emissions from the XPO
2
are
causing the interference, turn the XPO
2
Off. If the interference
with the other device(s) stops, then the XPO
2
is causing the
interference. In such rare cases, interference may be reduced
or corrected by one of the following measures:
• Reposition, relocate, or increase the separation
between the equipment.
• Connect the equipment into an outlet on a circuit
different from that to which the other device(s) is
connected.
DO NOT connect the concentrator in parallel or series with
other oxygen concentrators or oxygen therapy devices.
Close supervision is necessary when this product is used near
children or physically‐challenged individuals.
Additional monitoring or attention may be required for
patients using this device who are unable to hear or see
alarms or communicate discomfort.
Be aware that electrical cords and/or tubing could present a
tripping hazard.
A change in altitude may affect total oxygen available to you.
Consult your physician before traveling to higher or lower
altitudes to determine if your flow settings should be changed.
Polarized Plug Instruction
As a safety feature, this appliance may have a polarized plug
(one blade is wider than the other). This plug will fit in a
polarized outlet only one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. DO NOT attempt to defeat this safety feature.