ACS ACR100I SIMFlash II - Manual (Page 10)

Document Title Here Document Title Here
Document Title Here ACR100I Reference Manual
Version 1.00
Page 10 of 20
www.acs.com
.hk
[email protected]
www.acs.com.hk
Offset Field Size Value Description
32 dwSynchProtocols 4
00000
000h
ACR100I does not support
synchronous card
36 dwMechanical 4
00000
000h
ACR100I does not support
special mechanical
characteristics
40 dwFeatures 4
00010
030h
ACR100I supports the following
features:

Automatic ICC clock
frequency change
according to parameters

Automatic baud rate
change according to
frequency and FI,DI
parameters

TPDU level exchange
with ACR100I
44
dwMaxCCIDMessageLen
gth
4
00000
10Fh
Maximum message length
accepted by ACR100I is 271
bytes
48 bClassGetResponse 1 00h
Insignificant for TPDU level
exchanges
49 bClassEnvelope 1 00h
Insignificant for TPDU level
exchanges
50 wLCDLayout 2 0000h No LCD
52 bPINSupport 1 00h No PIN Verification
53 bMaxCCIDBusySlots 1 01h
Only 1 slot can be
simultaneously busy
7.1. Command to the ACR100I
7.1.1. CCID Command Pipe Bulk-OUT Messages
ACR100I shall follow the CCID Bulk-OUT Messages as specified in CCID section 4. In addition, this
specification defines some extended commands for operating additional features. This section lists
the CCID Bulk-OUT Messages to be supported by ACR100I.
7.1.1.1. PC_to_RDR_IccPowerOn
Activate the card slot and return ATR from the card
Offset Field Size Value Description
0 bMessageType 1 62h
1 dwLength 4
00000
000h
Size of extra bytes of this message
2 bSlot 1
Identifies the slot number for this
command