Acroprint ATRx Biometric 1000 - Manual (Page 2)

3 - ATRx Biometric 1000™ Installation Guide
Installing the HandPunch
The quick start sheet reviews the installation of software and the
connection of the HandPunch to your PC. For instructions on
preparing the HandPunch for wall mounting, routing of wiring,
and wiring connections, please refer to the HandPunch 1000
manual on pages 15-21. Be sure to enroll and test the employees
prior to mounting the Handpunch.
Accessing the Software User Manual
You can access the user manual in two ways:
A. Click on the Help menu in the Administrator section of the
software. Search for information by topic.
B. Go to http://www.acroprintstore.com/downloads/manuals/
atrxmanual.pdf to download a complete manual from our website.
The user manual is offered in PDF format, which requires Adobe
Acrobat Reader to view.
Let’s Get Connected
FIRST, TURN OFF YOUR PC!
1.To avoid damage to the PC port, PC power must be completely
shutdown prior to attaching the HP1000 communication cable.
2. Connect the serial connector of the communication cable to
a serial port on the back of your PC.
3. Connect the other end of the communication cable to the
RS232 port on the back of HP1000.
Install and Setup ATRx Software
If you have completed pages 2 and 3, please restart your PC before
loading the software.
1. Install ATRx Biometrically Enabled Software by inserting the
CD into the CD-ROM drive and complete the installation wizard.
2. Select Restart the PC at the end of the software installation.
3. Follow the on-screen Setup Wizard entering in your company
information, such as pay period type, overtime rules, and shift
settings. You will be prompted to enter your employee information
at this time.
If you do NOT complete the Setup Wizard the program will not run successfully.
Please write down your administrative password and store in a safe place. You will
be prompted to enter the password when you activate the HandPunch 1000 to the
PC.
NOTE
NOTE
ATRx Biometric 1000™ Installation Guide - 4