Pch 7791 – Acnodes PCH 7791 User Manual

Page 24

PCH 7791

17 inch Atom Fanless Panel PC

All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.

14628 Central Ave.

Chino, CA91710

Tel:909.597.7588, Fax:909.597.1939

4.2.2 UNPACKING PROCEDURE

To unpack the APM series industrial monitor, follow the steps below:

WARNING:
The front side LCD screen has a protective plastic cover stuck to the screen. Only remove the plastic cover
after the APM series industrial monitor has been properly installed. This ensures the screen is pro-
tected during the installation process.

Step 1: Use box cutters, a knife or a sharp pair of scissors to open the seal on the top side of the external
(second) box.

Step 2: Open the external (second) box.

Step 3: Use box cutters, a knife or a sharp pair of scissors the seal on the top side of the internal (first)
box.

Step 4: Lift the monitor out of the boxes.

Step 5: Remove both polystyrene ends, one from each side.

Step 6: Pull the plastic cover off the APM series industrial monitor.

Step 7: Make sure all the components listed in the packing list are present.

4.2.3 PACKING LIST

All the monitors in the APM series are shipped with the following components:

APM5121 / APM5151 industrial LCD monitor
1 x Power cable for terminal block
1 x VGA cable
1 x Screw set
1 x User manual on CD-ROM
1 x Touch screen RS-232 cable / touch pen / driver CD-ROM
*1 x 45W AC power adapter with AC 90V ~ 264V @ 1A input and DC +12V
@3.75A output / AC power cord
* External 45W power adapter only supports 0°C ~ 40°C operating temperature
If any of these items are missing or damaged, contact the distributor or sales representative imme
diately.