Inserting.a.lancet.drum – Accu-Chek Aviva Plus silver User Manual

Page 31

Inserting.a.Lancet.Drum

You.must.first.load.the.drum.into.the.lancing.device.to.get.it.ready.for.use.

1. Remove the cap by

pulling it straight off. It

is not a twist cap. The

easiest way to do this

is to place your thumb

to the side of the

notch as seen in the

illustration.

2. Before you insert a

drum, be sure that the

release button is not

yellow, and that no

lancets are sticking

out of the drum. Insert

a new drum, blue ring

first, until it stops. It

clicks into place.

3. Slide the cap on until

it stops by aligning

the notch on the cap

with the notch on the

device.

4. You are now ready to

use the first lancet.

The lancet counter on

the plunger shows a

number 6, meaning

you have 6 new

lancets remaining.

NOTE.

Once the drum is inserted into the lancing device, do not remove the drum until completely used. The drum

cannot be reinserted.