Accu-Chek Aviva Plus silver - Manual (Page 18)

16
4. Repeat steps 2 and 3 to set the minutes, am/pm,
month, day, and year. The flashing field is the one
that is being changed.
5. Once the year is set, press and hold until the
flashing test strip symbol appears. The time and
date are now set.
See Chapter 4, “Meter Setup” to set other options.
NOTE
When you install a new battery, the meter automatically prompts you to check the time and date when you
turn it on. If the time and date are correct, press and hold to exit the set‑up mode.