Transferring data – Accu-Chek Active User Manual
Page 40
38
Chapter 4: Using Your Meter’s Memory
ACCU-CHEK Customer Care Service Center 1-800-858-8072
Transferring Data
Infrared
(IR) Window
1.
Install the software according to the instructions.
2.
Run the software program and follow the instructions about how to
download information.
Make sure the software is ready to accept data from the meter.
3.
Locate the infrared (IR) window on the top of the meter.
4.
Locate the IR window on the infrared cable or PDA.
5.
Point the two IR windows toward each other. They should be no
more than 4 inches (10 cm) apart.
6.
Press
until “PC” flashes and release to turn on the meter.