Accu-Chek Active - Manual (Page 15)

3. Slide the battery tray back into the meter
until it locks into place. • The battery symbol on the screen means
the battery is low and should be
changed soon.
• If the meter shuts off after 3 seconds, no
more tests can be run.
To change the battery, remove the old
battery and place the new one in the
tray with the + side facing down.
Notes:
• The meter uses one lithium battery. Always keep an
extra battery on hand.
• After you change the battery, you will have to reset the
time and date, but all test results stay in memory with
their time and date.
• The meter turns off automatically after two minutes of
nonuse. When this happens, test results are still saved
in memory.
Chapter 1: Understanding Your New System
ACCU-CHEK Customer Care Service Center 1-800-858-8072
13