M-AUDIO Dman PCI - Manual (Page 11)

4. If you installed the MIDI Interface Cable in Step 3, you may now attach
any MIDI devices you may have. Connect the MIDI device MIDI Out to
the DMAN PCI MIDI In, and connect the MIDI device MIDI In to the
DMAN PCI MIDI Out. You will most likely need to use standard MIDI
cables to make these connections.
5. Move your computer back to its original position. You may now turn on
your computer.
Typical DMAN PCI Setup
Restarting Your Computer for the First Time
(after installing the DMAN PCI)
After installing the DMAN-PCI board, the first time you power up your com-
puter the Plug-and-Play (PnP) system must configure the board for use. This
process will usually only be required once, unless you move the DMAN-PCI to
a different PCI slot at a later time.
MIDI In MIDI Out
Line In (R)
Line In (L)
Line Out (R)
MIDI
MIDI Out MIDI In
MIDI Keyboard
Left
Right
Main In
Amplifier
Mic
Left Out Right Out
Line Mixer
DMAN PCI
Guitar
Line Out (L)
11