JVC GR-DVX10 - Manual (Page 5)

EN
5
GETTING STARTED
What is MultiMediaNavigator?
MultiMediaNavigator is an application software that gives you creative control over images
shot by a digital video camera.
Once JVC digital video camera has been connected to a PC (Windows
® 95/Windows ® 98)
using the connecting cable, this software enables you to capture images suitable for your
purposes in your PC, use the PC to control the AV unit and perform video editing (dubbing)
operations for the scenes of your choice.
Simply by connecting a cable, the software also makes it easy for the data on the memory card
inside JVC digital video camera to be transferred to the PC.
What is JLIP?
JLIP* stands for Joint Level Interface Protocol, a new communication protocol which allows AV
units equipped with a JLIP terminal to be controlled by a personal computer.
*
is a registered trademark of JVC.
Major features
Ⅲ
Picture Navigator
Picture Navigator allows you to transfer still images between a video source unit and a PC via
the RS-232C serial port. Captured images will be 640 x 480 pixels with 16.7 million colors.
Ⅲ
JLIP Video Capture
JLIP Video Capture allows you to capture still images from a video source unit to a PC via the
RS-232C serial port.
Ⅲ
JLIP Video Producer
JLIP Video Producer allows you to control a video source unit from a PC. You can copy scenes
from the video source unit to a VCR by setting In/Out points.
Ⅲ
CardNavigator
This transfers the data on the memory card (MultiMediaCard) inside JVC digital video camera
to the Windows
® PC.
Ⅲ
Video Player/JVC Video Decoder
The moving image data which has been transferred to the Windows ® PC using the
CardNavigator can be played on the Windows ® PC. This data (files with the “.jmm” extension)
is the moving image data on the memory card (MultiMediaCard) inside JVC digital video
camera.
Ⅲ
Title Creator
You can create or modify your own Title/Frame Images on a PC and transfer them to the video
source unit that is packaged with this software.