JVC GR-DVL300 - Manual (Page 9)

EN
9
T W
WHEN CONNECTED TO A VCR NOT EQUIPPED WITH A
JLIP JACK
When using a VCR not equipped with a JLIP jack, set your VCR brand using the remote control
unit, then perform editing using the remote control.
When JLIP Video Producer is used:
When JLIP Video Capture is used:
To PC jack
To S OUT jack
S-VIDEO cable
AUDIO/VIDEO cable
To S-VIDEO
input jack
Editing cable
To JLIP jack
PC connection cable
PC
To COM port
(RS-232C)
Video Camera
White to
AUDIO L
Red to
AUDIO R
To AV jack
Yellow to
VIDEO
Connect this if the video
source unit has an S-Video
input jack.
VCR
(Recording deck)
Connect here if the
recording deck doesn’t
have a remote pause jack.
Remote control unit
To remote
pause jack
Use the plug which has three
yellow rings around the pin.
Use the plug
which has one
black ring
around the pin.
If your VCR has a SCART
connector, use the cable
adapter.