JVC KW-AV60BT - Manual (Page 67)

67
ENGLISH
Symptom Remedy/Cause
Bluet
ooth (only f
or
KW
-A
V60BT
)
Phone sound quality is poor. • Reduce the distance between the unit and the
Bluetooth mobile phone.
• Move the car to place where you can get a better signal
reception.
The sound is interrupted or skipped while
using a Bluetooth audio player. • Reduce the distance between the unit and the
Bluetooth audio player.
• Disconnect the device connected for Bluetooth phone.
• Turn off, then turn on the unit.
• (When the sound is not yet restored) connect the player
again.
The connected audio player cannot be
controlled. Check whether the connected audio player supports AVRCP
(Audio Video Remote Control Profile).
Bluetooth device does not detect the unit. • Check whether the Bluetooth adapter (KS-UBT1) is
inserted correctly.
• Search from the Bluetooth device again.
• When “Waiting for connection...” appears on the screen,
press [Cancel] then connect a Bluetooth device.
The unit does not make pairing with the
Bluetooth device. Enter the same PIN code for both the unit and target
device. If the PIN code of the device is not indicated on its
instructions, try “0000” or “1234.”
Echo or noise occurs. • Adjust the microphone unit position.
• Make sure that NR/EC (Noise reduction/Echo cancel)
function is activated. (☞ page 50)
The unit does not respond when you try to
copy the phone book to the unit. You may have tried to copy the same entries (as stored)
to the unit.
EN_KW-AV60E.indb 67 EN_KW-AV60E.indb 67 11/12/12 19:02 11/12/12 19:02