Instrument panel indicators – HONDA 2011 CR-V User Manual
Page 70

This indicator comes on when you
set the cruise control. See page
for information on operating the
cruise control.
This indicator comes on when you
turn on the cruise control system by
pressing the CRUISE button (see
page
).
This indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position, and when the ignition
switch is turned to the START (III)
position.
It comes on as a reminder that you
have turned off the vehicle stability
assist (VSA) system.
This indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position, and when the ignition
switch is turned to the START (III)
position. For more information, see
page
.
If it comes on and stays on at any
other time, there is a problem with
the VSA system. Take your vehicle
to a dealer to have it checked.
Without VSA, your vehicle still has
normal driving ability, but will not
have VSA traction and stability
enhancement. See page
for more
information on the VSA system.
It flashes when VSA is active (see
page
).
324
266
266
324
324
Vehicle Stability Assist
(VSA) System Indicator
Cruise Control Indicator
Cruise Main Indicator
VSA OFF Indicator
Instrument Panel Indicators
64
10/07/09 18:16:59 31SWA640_069