Installing a child seat – HONDA 2011 CR-V User Manual
Page 52

To install a LATCH-compatible child
seat in the rear center seating
position, use the center lower
anchors as shown above.
Tighten the strap according to the
seat maker’s instructions.
Push and pull the child seat
forward and from side-to-side to
verify that it is secure.
Reinstall the dual deck cargo shelf.
Pull down the cover to access the
tether anchor.
Follow step 1 through 4 as
described previously to secure the
child seat.
Remove the head restraint (see
page
). Make sure the
removed head restraint is secured
in the cargo area. Reinstall the
head restraint when the child seat
is removed.
1.
8.
9.
7.
2.
3.
102
Using the Center LATCH
Installing a Child Seat
46
TETHER ANCHOR
CENTER LOWER ANCHORS
COVER
10/07/09 18:14:25 31SWA640_051
This manual is related to the following products: