Installing a child seat, 2011 accord crosstour – HONDA 2011 Accord Crosstour User Manual
Page 46
Whatever type you have, follow
the child seat maker’s instructions
for adjusting or tightening the fit.
Other LATCH-compatible seats
have a flexible-type connector as
shown above.
Attach the tether strap hook to the
tether anchor, then tighten the
strap as instructed by the child
seat maker.
If the tether strap is too long and
cannot be tightened firmly, find a
route where the strap can be
tightened securely.
Push and pull the child seat
forward and from side-to-side to
verify that it is secure.
Lift the head restraint (see page
), then route the tether strap
through the legs of the head
restraint and over the seat-back,
making sure the strap is not
twisted.
Remove the front cargo area cover
(see page
).
Open the anchor cover.
4.
5.
7.
6.
8.
EX-L models
Installing a Child Seat
Dr
iv
er
and
P
asseng
er
Saf
e
ty
43
ANCHOR
Flexible type
TETHER STRAP HOOK
ANCHOR COVER
10/08/27 14:19:08 31TP6610_048
2011 Accord Crosstour