beautypg.com

Changing a flat tire – HONDA 2011 Accord Crosstour User Manual

Page 377

background image

Attach the short end of the wheel
nut wrench to the spare tire holder
shaft. Turn the wrench
counterclockwise until the shaft
loosens. Then attach the longer
section of the wrench to the shaft,
and turn it until you can see the
spare tire (about 65

70 rotations).

Do not turn the wrench any
further once you feel resistance.

The spare tire is stored
underneath the cargo area.
Remove the plastic cover on the
cargo area lining to access the
shaft for the spare tire holder.

Lift up the spare tire holder, then
slide the hook and lift down the
spare tire holder.

Remove the spare tire from the
spare tire holder.

6.

7.

8.

9.

Changing a Flat Tire

374

WHEEL NUT WRENCH

SPARE TIRE

PLASTIC COVER

SPARE TIRE HOLDER

HOOK

The wheel nut wrench supplied with
your vehicle is specially adapted to f it
the holder shaf t. Do not use any other
tool.

10/08/27 15:03:54 31TP6610_379

2011 Accord Crosstour

This manual is related to the following products: