Lights, 2011 accord crosstour – HONDA 2011 Accord Crosstour User Manual
Page 350
Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
To remove the burned out bulb,
push it in and turn it
counterclockwise until it unlocks.
Open the hood.
To change the turn signal bulb on
the passenger’s side, remove the
engine coolant reserve tank by
pulling it out of its stay.
To change a bulb on the driver’s side,
remove the fastener with a flat-tip
screwdriver, and remove the splash
separator by pushing the tab. Then
remove the duct.
1.
2.
3.
CONTINUED
Lights
Replacing a Front Turn Signal/
Parking Light Bulb
Ma
int
e
na
nce
347
STAY
DUCT
TAB
BULB
SOCKET
SPLASH
SEPARATOR
FASTENER
10/08/27 15:00:28 31TP6610_352
2011 Accord Crosstour
This manual is related to the following products: