HONDA 2011 Accord Crosstour - Manual (Page 378)

CONTINUED
Place the jack under the jacking
point nearest the tire you need to
change. Turn the end bracket
clockwise until the top of the jack
contacts the jacking point. Make
sure the jacking point tab is
resting in the jack notch. Loosen each wheel nut 1/2 turn
with the wheel nut wrench.
To reinstall the spare tire holder,
slide the hook, lift up the spare tire
holder and attach it to the hook.
Attach the longer section of the
wrench to the spare tire holder
shaft. Turn the wrench clockwise.
Then attach the short end of the
wrench to the shaft, and tighten it
securely.
Reinstall the plastic cover. 11.
10.
12. 13.
Changing a Flat Tire
T
a
k
ing
Ca
re
of
th
e
U
ne
x
p
e
c
te
d
375
WHEEL NUT
JACKING POINTS
10/08/27 15:04:01 31TP6610_380
2011 Accord Crosstour