HONDA 2008 S2000 - Manual (Page 62)

Push down on the
lever to signal a left turn and up to
signal a right turn. To signal a lane
change, push lightly on the lever,
and hold it. The lever will return to
center when you release it or
complete a turn.
Turning the
switch to the ‘‘ ’’ position turns
on the parking lights, taillights,
instrument panel lights, side-marker
lights, and rear license plate lights.
Turning the switch to the ‘‘ ’’
position turns on the headlights. If
you leave the lights on with the key
removed from the ignition switch,
you will hear a reminder buzzer
when you open the driver’s door.
Turn Signal
Off
Parking and indicator lights
Headlights on
High beams
Flash high beams
Push the lever
forward until you hear a click. The
high beam indicator will come on
(see page
). Pull the lever back to
return to the low beams.
To flash the high beams, pull the
lever back lightly, then release it.
The high beams will stay on as long
as you hold the lever back.
With the headlight switch off, the
high beam headlights and the high
beam indicator come on with
reduced brightness when you turn
the ignition switch to the ON (II)
position and release the parking
brake. They remain on until you turn
the ignition switch off, even if you
set the parking brake.
The headlights revert to normal
operation when you turn them on
with the switch.
1.
2.
3.
4.
5.
6.
49
Turn Signal
Headlights On
High Beams
Daytime Running Lights
Turn Signals and Headlights
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
59 2008 S2000
Table Of Contents Main Menu