beautypg.com

Changing a flat tire – HONDA 2008 S2000 User Manual

Page 205

background image

Unscrew the wing bolt, and take
the spare tire out of the spare tire
shelf.

Remove the three clips holding
the spare tire cover by pulling the
rings straight back. Remove the
spare tire cover.

Loosen each wheel nut 1/2 turn
with the wheel nut wrench.

Place the jack under the jacking
point nearest the tire you need to
change. Turn the end bracket
clockwise until the top of the jack
contacts the jacking point. Make
sure the center of the jacking
point tab is resting in the jack
notch.

4.

5.

6.

7.

Changing a Flat Tire

202

SPARE TIRE COVER

WHEEL NUT WRENCH

JACKING
POINT

CLIPS

2008 S2000

Table Of Contents

Main Menu