beautypg.com

Vents and heating – HONDA 2008 S2000 User Manual

Page 104

background image

Push this lever up and down to
increase or decrease the fan speed
and airflow. The indicators next to
the lever show you the speed and
airflow selected.

Turning this dial clockwise increases
the temperature of the airflow.

This button turns the rear window
defogger off and on (see page

).

When the recirculation indicator is
on, air from the vehicle’s interior is
sent through the system again
(recirculation mode). When the
indicator is off, air is brought in from
the outside of the vehicle (fresh air
mode).

Switch to recirculation mode when
driving through dusty or smoky
conditions, then return to fresh air
mode.

The outside air intakes for the
heating system are at the base of the
windshield. Keep this area clear of
leaves and other debris.

The system should be left in fresh
air mode under almost all conditions.
Keeping the system in recirculation
mode, can cause the windows to fog
up.

Do not push the defogger button
when the removable hardtop is
removed.

Airflow is divided between

the vents in the dashboard and the
floor vents.

Air flows from the vents on

both sides of the instrument panel,
and from the dashboard vent in front
of the passenger.

Use the mode control dial to select
the vents the air flows from. Some
air will flow from the dashboard
vents in all modes.

61

CONTINUED

Fan Control Lever

Temperature Control Dial

Rear Window Def ogger Button

Recirculation Button

Airf low Controls

Mode Control Dial

Vents and Heating

Fe
a

tu

re

s

101

2008 S2000

Table Of Contents

Main Menu