beautypg.com

Repairing a flat tire – HONDA 2008 S2000 User Manual

Page 214

background image

Remove the tire valve cap, screw the
air pump hose onto the tire valve,
and check the air gauge. (You do not
need to attach the power cord or
turn the air pump switch on.)

If the pressure is at 32 psi, continue
driving to the nearest service station.

In any case, be sure to have the
damaged tire permanently repaired
or replaced as soon as possible.

Remember to return the tire sealant
bottle to your Honda service center
for proper disposal.

If the pressure is lower than 32 psi
and higher than 19 psi, use the air
pump to bring air to the desired level
as described in step 10. Then drive
to the nearest service station.

If the pressure is below 19 psi, do not
continue. Have the vehicle towed
(see page

).

228

Repairing a Flat Tire

T

a

k

ing
Ca
re

of
th

e

U

ne
x

p

e

c

te

d

211

AIR PUMP HOSE

TIRE VALVE

VALVE CAP

2008 S2000

Table Of Contents

Main Menu