HONDA 2008 S2000 - Manual (Page 109)

If you are
traveling far from home and can no
longer receive your preset stations,
you can use the auto select feature to
find stations in the local area.
Press the A. SEL button. ‘‘A. SEL’’
flashes in the display, and the system
goes into scan mode for several
seconds. It stores the frequencies of
six AM and twelve FM stations in
the preset buttons.
You will see a ‘‘0’’ displayed after
pressing a preset button if auto
select cannot find a strong station for
that preset button.
, press the
A. SEL (auto select) button. This
restores the presets you originally
set.
If you do not like the stations auto
select has stored, you can store
other frequencies on the preset
buttons as previously described.
Turn the knob to adjust the setting.
When the level reaches the center,
you will see a ‘‘C’’ in the display. The
system will return to the audio
display in about 5 seconds.
You can use the instrument panel
brightness control buttons to adjust
the illumination of the audio system
(see page
). The audio system
illuminates when the parking lights
are on, even if the radio is off.
Press the SOUND/MODE (TUNE)
knob repeatedly to display the bass
(BAS), treble (TRE), fader (FAD),
and balance (BAL) setting.
Adjusts the bass in the
sound.
Adjusts the treble in the
sound.
Adjusts the fader, or the
front-to-back strength of the sound.
Adjusts the balance, or side-
to-side strength of the sound.
60
To turn off auto select AUTO SELECT
Audio System Lighting
Adjusting the Sound
BAS
TRE
FAD
BAL
Playing the AM/FM Radio
106 2008 S2000
Table Of Contents Main Menu