HONDA 2011 Insight - Manual (Page 383)

Place a cloth on the edge of the
light assembly garnish to prevent
scratches. Remove the cover by
carefully prying in the notch on its
left edge with a flat-tip screwdriver.
Remove the socket from the front
turn signal light assembly by
turning it one-quarter turn
counterclockwise.
Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
Insert the socket back into the
front turn signal light assembly.
Turn it clockwise to lock it in place.
Turn on the lights to make sure
the new bulb is working.
Install the light assembly in the
reverse order of removal. Make
sure to secure the bolt.
Install the garnish in the original
position securely. Remove the bolt and pull the front
turn light assembly from the
bumper while taking the tab out
from the holder.
5.
6.
1.
7.
8.
3.
4.
2.
Lights
Replacing the Front Turn Signal
Light Bulb
Ma
int
e
na
nce
377
TAB
BOLT GARNISH
NOTCH
BULB
10/09/02 14:29:16 31TM8610_382