HONDA 2011 Insight - Manual (Page 140)

Separate the transmitter by prying
its middle seam with your
fingernail.
Be careful when removing
this screw as the head of the screw
can strip out.
Remove the screw at the base of
the transmitter with a small
Phillips-head screwdriver.
Inside the transmitter, separate
the inner cover from the keypad
by carefully prying on the edge
with a coin. Remove the old battery and note
the polarity. Make sure the
polarity of the new battery is the
same (
side facing down), then
insert it in the keypad.
An improperly disposed of battery
can hurt the environment.
Always confirm local regulations for
battery disposal.
Install the parts in reverse order.
To replace the battery:
1.
2.
3. 4.
5.
Remote Transmitter
134
NOTE:
SCREW
BATTERY
COIN
10/09/02 13:58:56 31TM8610_139