Multi-information display – HONDA 2011 Insight User Manual
Page 118
Press the SEL/RESET button to
enter the selecting mode.
Select ON or OFF by pressing the
INFO (
/
) button, then enter
your selection by pressing the SEL/
RESET button.
You can choose this item to
customize from ‘‘DOOR SETUP’’ by
pressing the INFO (
/
) button
repeatedly.
When you push the LOCK button on
the remote transmitter, some
exterior lights flash, and a beeper
sounds when you push the LOCK
button again within 5 seconds to
verify that the doors and the hatch
are locked and the security system
has set (see page
). You can
customize the exterior lights not to
flash and the beeper not to sound.
267
Keyless Lock Acknowledgment
Multi-Information Display
112
10/09/02 13:56:20 31TM8610_117
This manual is related to the following products: