FIAT Stilo User Manual

Page 90

SAFETY DEVICES

CORRECT USE OF THE CAR

ARNING

LIGHTS AND MESSAGES

IN AN

EMERGENCY

CAR

MAINTENANCE

TECHNICAL

SPECIFICA

TIONS

INDEX

DASHBOARD AND CONTROLS

To refit the cover, insert the reel ends in
their housings and make sure the fasten-
ing hooks are well fastened. Now extend
the cover by pulling its handles, as previ-
ously described, and hook the two rear
pins B-fig. 111.

IMPORTANT Do not put heavy objects on
the cover which may seriously damage it.

TO RETURN THE REAR SEAT
BACK TO ITS ORIGINAL
POSITION

Move the seat belt sideways and check
that the belt is not twisted.

Versions with rear fixed seat

Lift the seat backs and push them back-
ward until both coupling mechanisms click
in place, check that the “red band” B-
fig. 112 at the side of levers A is no
longer visible.

The “red band” B indicates missing seat
back coupling.

Reposition the cushions in horizontal po-
sition keeping the centre seat belt tongue
raised.

fig. 111

F0C0352m

fig. 112

F0C0378m

The objects put on the cov-
er may be thrown forwards

and injure passengers should you
brake sharply or in the event of an ac-
cident.

WARNING

Make sure the seat back is
correctly hooked on both

sides (“red bands” B-fig. 112 not vis-
ible) to prevent seat back being
thrown forwards and injuring pas-
sengers should you brake sharply.

WARNING