FIAT Stilo - Manual (Page 187)

186
W
ARNING
LIGHTS AND MESSAGES
CAR
MAINTENANCE
TECHNICAL
SPECIFICA
TIONS
IINDEX
DASHBOARD AND CONTROLS
SAFETY DEVICES
CORRECT USE OF THE CAR
IN AN
EMERGENCY
DIRECTION INDICATORS
Front fig. 24
To change the bulb, proceed as follows:
❒ remove the protective cover releasing
the catch;
❒ turn the bulb holder A counterclock-
wise and remove it;
❒ remove the bulb B pushing it gently and
turning counterclockwise;
❒ replace the bulb and then refit the bulb
holder turning it clockwise, checking
that it is secured correctly;
❒ refit the protective cover correctly.
Side fig. 25
To change the bulb, proceed as follows:
❒ push the transparent cover A towards
car running direction to compress the
catch;
❒ remove the unit;
❒ turn the bulb holder B counterclock-
wise, remove the snap-fitted bulb C and
replace it;
❒ refit the bulb holder B in the transpar-
ent cover, then position the unit mak-
ing sure the catch clicks into place.
FRONT FOG LIGHTS
(where provided) fig. 26
To change the bulb, proceed as follows:
❒ remove the protective cover releasing
the catch;
❒ release the bulb holder catch A;
❒ disconnect the electric connector B;
❒ remove the bulb C and replace it;
❒ fit the new bulb, making the tabs of the
metallic part coincide with the grooves
on the reflector, reconnect the electri-
cal connector B then hook the bulb
holder catch A;
❒ refit the protective cover correctly.
fig. 24 F0C0177m fig. 25 F0C0212m fig. 26 F0C0176m